Using a Laser Level to Level Ground
Are you looking for an easier way to level the ground around your house or business? A laser level is the perfect tool to help you get the job done quickly and accurately. Whether you’re planning on laying down new sod, putting in a pool, or tiling an outdoor space, you can use a laser level to make sure that the ground is aligned properly. Read on to learn more about how to use a laser level to level your ground with ease.
1. Preparing the Ground
Measuring the Ground
Before actually using the laser level, take the time to measure the area you need to level. This will help determine the amount of earth that needs to be shifted and the slope of the ground. Start by placing a measuring tape between two points, making sure to keep the tape taut and the line straight. Record the measurements and repeat them in different areas to map out the exact area and its current shape.
Getting the Right Equipment
You’ll also need the right equipment to help you level the ground. This includes a shovel and a rake, a wheelbarrow, and a long, straight board (e.g. 4 feet or longer). The board can be used as a straight edge to check levels, while the wheelbarrow and shovel are useful for moving dirt around.
Marking Out the Area
Once you have the measurements and materials, mark out the area with round wooden or metal stakes and string, creating a boundary for the leveling project. This will help ensure that the project area is clear and all that is within it can be addressed.
2. Setting up the Laser Level
After you’ve familiarized yourself with all the features of the laser level and determined your job’s requirements, it’s time to set up the device. Here are the steps to properly level the ground with a laser level:
- Place the laser level carefully: Set up the laser level on a steady surface and make sure it won’t move even if you lightly touch it.
- Focus the laser level: Adjust the dials to set the laser level to the desired level and make sure it does not move to and fro while aiming.
- Check the bubble level: Use the built-in bubble levels and adjust the laser level until the bubbles align with the center.
- Check the results: Verify the incorporated leveled surface by attaching a grade rod and verifying the alignment of the laser beam.
The above steps will ensure the ground is properly leveled. The laser level should be able to handle minor bumps, curves, and humps. If adjustments are necessary, the laser level’s convergence positions can be adjusted. Make a final check to ensure everything is lined up correctly and the setup is complete.
3. Leveling the Ground
Using a laser level can make leveling ground much easier than traditional methods. Here are the steps you’ll need to follow:
- Set Up the Laser Level: Be sure to set up the laser level correctly. Here are a few tips to get you started: Set the level on a tripod and make sure it’s on a level surface. Check that the level is pointed in the right direction and that it’s properly aligned with your target.
- Find the Lowest Point: Use a shovel to dig a few trenches, then use the laser level to find the lowest point of the ground.
- Fill the Lowest Point: Now that you’ve identified the lowest point, you can start to fill it with soil. Make sure you compact the soil down as you fill it.
- Use a Rake: Now that you’ve filled the lowest point, use a rake to spread the soil evenly.
- Check with the Laser Level: To finish, double-check that all the ground is level by using the laser level again.
And that’s all there is to it! With these steps, you should now be able to effectively use a laser level to level ground.
Also read: Guide to Using a Laser Level for Footings
4. Review and Finishing Touches
To make a perfect level surface, it’s important to go through. Here are a few tips to help you get the job done fast:
- Check with a spirit level. After you have created a rough surface with the laser level, you should check the grade with a spirit level. If an area needs more attention, then use the laser level again to make adjustments.
- Clear away any debris. Check the surface for any debris that may have been left behind and clean it up with a blower or broom. It’s important to have a clear and clean surface that is ready for any reseeding or tiling.
- Check for level accuracy. You should double-check the area to make sure it is even and level. This can easily be done by checking with a chalk line. If necessary, make any final adjustments required to get the ground exactly level.
- Protect the area. You should protect the area with stakes, safety fencing and caution tape. By doing this, you will ensure that no one will disturb the area and ruin the level you have created.
Remember to create a safe work area and to wear the necessary protective clothing such as a hardhat and safety glasses. By following these few simple steps, you’ll be able to make a perfectly level surface with a laser level.
If you want to make quick and accurate leveling jobs, a laser level is the way to go. With proper use and maintenance, a laser level will help you achieve professional-level results every time. If you have any further questions about using a laser level, don’t hesitate to reach out to your local home improvement store for more advice.